My Cart: 0 item(s)
SACBN Series | Rooftop Support Base Only
Our rooftop support blocks provide a reliable solution for
supporting various applications such as solar PV mounting systems, piping, HVAC
equipment, roof top walkway, ducts, conduit, cable tray supports, and
mechanical equipment. Our roof blocks are designed to be installed quick and
adjust to meet any piping or mechanical equipment support needs without
penetrating or damaging the roofing. The stable design and cushioned base ensure
that our blocks are the perfect solution for any rooftop system. Additionally,
our blocks are suitable for any type of roofing material or other flat
surfaces.
The DSACBN-Base Rooftop Support is UV resistant and suitable for installation on most types of roofing material or other flat surfaces.
Screw fasteners can be used to attach one or two-hole pipe straps or a piece of strut (not included). Can also be used as a curb (sleeper) replacement. Uniform load capacity for the DSACBN-Base Rooftop Support is 2,500 lbs. (11.12 kN).
This load is only for the capacity of the components in this assembly. Please consult roofing manufacturer or engineer for roof load capacity.
Screw fasteners can be used to attach one or two-hole pipe straps or a piece of strut (not included). Can also be used as a curb (sleeper) replacement. Uniform load capacity for the DSACBN-Base Rooftop Support is 2,500 lbs. (11.12 kN).
This load is only for the capacity of the components in this assembly. Please consult roofing manufacturer or engineer for roof load capacity.
Our rooftop support blocks provide a reliable solution for
supporting various applications such as solar PV mounting systems, piping, HVAC
equipment, roof top walkway, ducts, conduit, cable tray supports, and
mechanical equipment. Our roof blocks are designed to be installed quick and
adjust to meet any piping or mechanical equipment support needs without
penetrating or damaging the roofing. The stable design and cushioned base ensure
that our blocks are the perfect solution for any rooftop system. Additionally,
our blocks are suitable for any type of roofing material or other flat
surfaces.
| Standard Fitting Dimensions | |||||
|---|---|---|---|---|---|
| WIdth | 1-5/8" | (41.3 mm) | |||
| Thickness | 1/4" | (6.3 mm) | |||
| Hole Diameter | 9/16" | (14.3 mm) | |||
| Hole Spacing On Center | 1-7/8" | (47.6 mm) | |||
| Hole Spacing From Ends | 13/16" | (20.6 mm) | |||
| *UNLESS OTHERWISE NOTED* | |||||
Frequently Asked Questions
Click on a question below to show the answer.
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov